These will be automatically displayed, overriding the switch position.
If there is more than one warning at once, range information has priority.
pg. 28 Trip Computer (option)
A. Trip Computer function selection switch B. Reset button
Trip Computer Selector Knob
Function selection knob A
Use this to select one of the six functions.
Reset button B
Resets:
- Average speed
- Average fuel consumption
- Tripmeter
Turn the knob to the required setting, then press reset button B for 1.5 seconds.
Pressing reset button B for more then 4 seconds, will reset all functions.
pg. 29 Trip Computer (option)
file:///K|/ownersdocs/2001/2001_SV40/01sv40_02b.htm (4 of 11)12/30/2006 3:49:13 PM
To Next Page
Loading...
