03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
111
Functions Information
Trip computer reset
•
Average
•
Average speed
Note that this function does not reset both trip meters T1 and T2 - see the table under the next
section "Headings" or the section "Resetting with 'Digital'" (p. 113) for information on the proc-
ess.
Messages
For more information, see Messages - handling (p. 104).
Themes
The appearance of the combined instrument panel (p. 58) is selected here.
Settings* Select Auto On or Off.
For more information, see Additional heater* (p. 136).
Contrast mode/Colour mode
Adjusting the combined instrument panel's brightness and colour intensity.
Parking heater*
•
Direct start
•
- Symbol Timer 1 - leads to the menu for
selecting time.
•
- Symbol Timer 2 - leads to the menu for
selecting time.
For a description of programming the timer, see Engine block heater and passenger compart-
ment heater* - timer (p. 132).
Service status
Shows the number of months and mileage to next service.
Oil level
A
For more information, see Engine oil - checking and filling (p. 331).
A
Certain engines.
Headings
Three trip computer headings can be dis-
played simultaneously - one in each "win-
dow" (see previous figure).
One of the heading combinations in the fol-
lowing table can be selected for constant dis-
play in the combined instrument panel. Pro-
ceed as follows to determine which:
To Next Page
