10 Maintenance and service
10
343
Lamp replacement - vanity mirror
lighting
The vanity mirror's lamps are fitted inside the
lamp lenses.
Removal of lamp lens
1. Insert a screwdriver under the lamp lens
and gently prize up the lock lugs on the
edge.
2. Snap off the lamp lens.
3. Use needle-nose pliers to pull the bulb
straight out to the side and replace with a
new one. Note! - Do not pinch hard with
the pliers. Otherwise the lamp lens could
then be crushed.
Attaching the lamp lens
1. Refit the lamp lens.
2. Press it into place.
Related information
•
Lamps - specifications (p. 343)
Lamps - specifications
The specifications apply to bulbs. When
replacing LED and Xenon lamps, please refer
to a workshop.
Lighting
W
A
Type
Dipped beam, hal-
ogen
55 H7 LL
Main beam, Halo-
gen
65 H9
Extra main beam,
ABL
55 H7 LL
Front direction
indicators
21 H21W LL
Side marker lamps
front
5 W5W LL
Side direction indi-
cators, door mir-
rors
B
5 WY5W LL
Glovebox lighting 5 Socket SV8.5
Length 43 mm
Vanity mirror light-
ing
2 T5 Socket
W2x4.6d
Cargo area lighting 10 Socket SV8.5
Length 43 mm
To Next Page
Loading...
