Volvo V70 - Park Assist Camera - Settings

07 Driver support
07
* Option/accessory, for more information, see Introduction.
239
Cars with reversing sensors*
Coloured areas (x 4, one per sensor) show dis-
tance.
If the car is also equipped with parking assis-
tance sensors (p. 233) the distance indication
will be more precise and the coloured areas
show which of the 4 sensors is/are registering
an obstacle.
The colour of the areas changes with
decreasing distance to the obstacle - from
green to yellow to red.
Colour / paint Distance (metres)
Green 0.8–1.5
Yellow 0,4–0,8
Red 0–0.4
Related information
•
Park assist camera - settings (p. 239)
•
Park assist camera - limitations (p. 240)
•
Park Assist* (p. 233)
Park assist camera - settings
The parking camera is an assist system and is
activated when reverse gear is engaged.
Settings
To change the settings for the parking cam-
era:
1. Press OK/MENU when a camera view is
shown.
2. Turn to reach the desired option with OK/
MENU.
3. Press OK/MENU and back out with EXIT.
or
1. Press CAM.
2. Press OK/MENU.
3. Turn to reach the desired option with OK/
MENU.
4. Press OK/MENU and back out with EXIT.
Miscellaneous
The default setting is that the camera is acti-
vated when reverse gear is engaged.
•
One press on CAM activates the camera
even if reverse gear is not engaged.
•
If the car has several cameras* installed
then cameras are alternated between by
pressing CAM or turning TUNE.
Related information
•
Park assist camera (p. 237)
•
Park assist camera - limitations (p. 240)