||
05 Loading and storage
05
152
Removing the cargo cover
1. Press in one end piece button and lift it
out.
2. Carefully angle the cover up/out and the
other end piece loosens automatically.
Lowering the cargo cover's rear sealing
disc
In its rolled-in position, the cargo cover's rear
sealing disc protrudes horizontally into the
cargo area when it is fitted.
– Pull the sealing disc back gently, free
from its support shelves, and lower.
Related information
•
Loading (p. 144)
•
Loading - long load (p. 145)
To Next Page
Loading...
