VOLVOTECH.EU INSTALLATION MANUAL
VBB4 ( VIDEO BREAK- IN BOX TYPE 4) VERSION 1.1
Page 8 of 14
CopyRight 2012, VolvoTech.EU
C: BE || CD 121107 || V 1.00 || RD 140228 || HC 1 || FC 3.26 ||
VolvoTech-manual-EN-installation-VBB4-VID-POW-MC-S40-V50-
C70-1.1.doc
Contact details:
VolvoTech.EU
support@volvotech.eu
INSTALLATION
Rearview camera
Remove lights and TORX screws from licenseplate light cover.Take the cover away
and put it on a table or so, protect the surface!
Now; drill a whole of 8.5mm,
Exactly on the center line between the right licenseplate light gap and the CENTER
of the most right O of VolvO. Do the same in the car’s original panel so the cable
and connector can be put trough. DO NOT finalize camera position YET, this has to
be done later, once the image is available for adjustment on the screen!
To Next Page
Loading...
