136 Graphic Display
Time stamp
1 To show the time when the fault code
was set for the first and latest occasion
respectively, press SELECT when the
particular fault code is presented (does
not apply to ABS brakes or SRS
airbag). The following menu is shown:
Numeric
Text
Time stamp
Reset
2 Select Time stamp and the following
text message is shown:
Data transfer
in progress
please wait
3 The following is shown (time stamp is
presented as the number of hours the
engine has been running):
Press Esc to return to the previous
menu.
First
X
Last
X
4 If the transfer should fail, the follow-
ing message is shown:
First
No data
Last
No data
To Next Page
Loading...
