Graphic Display 161
Alarm clock
MENU: TIME/DIST, ALARM CLOCK
Setting the alarm clock:
1 To set the alarm clock, press SELECT
when the menu ALARM CLOCK is
shown in the menu TIME/DIST.
2 Move the cursor to SET using the
up/down buttons. Press SELECT.
If the speed during the setting exceeds
5 mph (8km/h), the function is can-
celled and the graphic display returns
to the last active display in the ON po-
sition.
3 Set the hours with the up/down
buttons. Confirm the choice with SE-
LECT.
4 Set the first digit in the minutes with
the up/down buttons. Confirm the
choice with SELECT.
5 Set the second digit in the minutes
with the up/down buttons. Confirm the
choice with SELECT.
6 Set the AM/PM (if the format is 12h)
with the up/down buttons. Confirm the
choice with SELECT.
7 Move the cursor to ON using the
up/down buttons. Press SELECT. A
symbol is shown on the right in the
graphic display window’s status bar in
order to highlight that the alarm clock
is activated.
8 Esc moves the highlight to the previ-
ous number or selection, if there are
any, otherwise the setting is cancelled.
ALARM 08:30 AM
CLOCK 08:00 AM
ON OFF SET
T3008833
To Next Page
Loading...
