Volvo XC90 TWIN ENGINE - Page 130

DISPLAYS AND VOICE CONTROL
128
Changing system units
Units settings are defined in the centre display's
Settings menu.
1.
Press
Settings in the top view in the centre
display.
2. Continue to
System System Languages
and Units
Units of Measurement.
3. Select from the following unit standards:
•
Metric - kilometres, litres and degrees
Celsius.
•
Imperial - miles, gallons and degrees
Celsius.
•
US - miles, gallons and degrees Fahren-
heit.
> The units in the driver display, centre dis-
play and head-up display are changed.
Related information
•
Overview of centre display (p. 105)
•
Opening settings in the centre display
(p. 128)
•
Changing settings in the centre display
(p. 130)
•
Changing system language (p. 128)
Changing system language
Language settings are defined in the centre dis-
play menu
Settings.
NOTE
Changing the language in the centre display
may mean that some owner information is not
compliant with national or local laws and reg-
ulations. Do not switch to a language that is
difficult to understand as this may make it dif-
ficult to find your way back in the structure on
screen.
1.
Press
Settings in the top view in the centre
display.
2. Continue to
System System Languages
and Units
.
3.
Select
System Language. Languages that
support voice recognition have a voice recog-
nition symbol.
> The language in the driver display, centre
display and head-up display is changed.
Related information
•
Overview of centre display (p. 105)
•
Opening settings in the centre display
(p. 128)
•
Changing settings in the centre display
(p. 130)
•
Changing system units (p. 128)
Opening settings in the centre
display
Settings and information for many of the car's
functions can be managed in the centre display.
Top view with button for Settings.
1. Open the top view by pressing on the tab or
by dragging/swiping from the top down-
wards across the screen.
2.
Press
Settings to open the settings menu.
3. Press one of the categories shown and navi-
gate to subcategories and respective set-
tings by pressing again.
4.
Press
Back to go back in the settings menu.
Press
Close to close the settings menu.