SEATS AND STEERING WHEEL
* Option/accessory.
191
To lower the head restraint, the button (located in
the centre between the backrest and head
restraint, see illustration) must be pressed in
while the head restraint is pressed down care-
fully.
WARNING
The centre seat head restraint must be in its
lowest position when the centre seat is not
used. When the centre seat is used, the head
restraint must be correctly adjusted to the
height of the passenger so that it covers the
whole of the back of the head if possible.
Electrical lowering of the rear seat's
outer head restraints*
The outer head restraints can be retracted via the
centre display's function view. You can lower the
head restraints in ignition position 0.
Press the
Headrest Fold but-
ton to activate/deactivate low-
ering.
Move the head restraint back manually until a
click is heard.
WARNING
Do not lower the outer head restraints if there
are passengers in any of the outer rear seats.
WARNING
The head restraint must be in locked position
after being folded up.
WARNING
The head restraints on the outer seats in the
second seat row must always be raised when
the third seat row* is occupied by passengers.
Related information
•
Lowering backrests in the second seat row
(p. 188)
•
Adjusting the seat longitudinally in the sec-
ond seat row* (p. 192)
•
Adjusting the backrest inclination in the sec-
ond seat row (p. 192)
•
Getting in/out of the third* seat row (p. 193)
•
Lowering backrests in the third seat row*
(p. 194)
To Next Page
Loading...
