||
SEATS AND STEERING WHEEL
* Option/accessory.
194
NOTE
If the backrest in the centre seat row cannot
be locked on its return after entry/exit, it may
need to be moved forward again and then
back with slightly more force.
WARNING
Check that the backrests and head restraints
in the rear seat are locked properly after
being folded up.
The head restraints of the outer seats must
always be raised when there are passengers
on any of the rear seats.
Related information
•
Lowering backrests in the second seat row
(p. 188)
•
Adjusting the head restraints in the second
seat row (p. 190)
•
Adjusting the seat longitudinally in the sec-
ond seat row* (p. 192)
•
Adjusting the backrest inclination in the sec-
ond seat row (p. 192)
•
Lowering backrests in the third seat row*
(p. 194)
Lowering backrests in the third seat
row*
The third seat row has two individual seats.
These can be lowered forward individually.
IMPORTANT
To be able to lower the third seat row back-
rests, it may be necessary to change the posi-
tion and angle of the seats in the second seat
row.
1. Pull upward/forward on the handle that is
located on the top of the backrest.
2. Make sure that the backrest with head
restraint does not come into contact with the
seat in front when lowered. Fold the backrest
forward.
> The seat cushion folds down/forward
when the backrest is lowered in order to
create a flat surface. The head restraint
lowers automatically when the rear seat is
lowered.
To raise the seat, raise the backrest manually
until it locks. The head restraint is raised man-
ually.
WARNING
Check that the backrests and head restraints
in the rear seat are locked properly after
being folded up.
The head restraints of the outer seats must
always be raised when there are passengers
on any of the rear seats.
Related information
•
Lowering backrests in the second seat row
(p. 188)
•
Adjusting the head restraints in the second
seat row (p. 190)
•
Adjusting the seat longitudinally in the sec-
ond seat row* (p. 192)
To Next Page
Loading...
