1
Before beginning installation of this product, refer to
Parts Diagram
on Page 2 and ensure all
parts are present and display no defects. If any part is missing or damaged, contact customer
service and do not attempt to install the product. Read all of the safety information on Page 3
before installation or use.
Estimated assembly time: 120 minutes
Additional tools required for assembly: Electrical tape, flathead & Phillips screwdriver, power
screwdriver, adjustable wrench, pliers, wire strippers, safety glasses, and ladder
Additional helpful tools: AC tester light, tape measure, wiring handbook, and wire cutters
Introduction
To Next Page
Loading...