6 | P a g e
Connection to Power
Before connecting, check that the voltage indicated on the appliance (bottom of the
appliance) corresponds with the main voltage in your home. If this is not the case,
consult your dealer and do not use.
This appliance may be fitted with a non-rewirable plug. If you need to change the fuse in
a non-rewirable plug, the fuse cover must be refitted. If the fuse cover is lost or damaged,
the plug must not be used until a replacement is obtained (available from the appliance
manufacturer).
If the plug has to be changed because it is not suitable for your socket, or becomes
damaged, it should be cut off and appropriate plug fitted following the wiring
instructions. The plug removed must be disposed of safely as insertion into a mains
socket is likely to cause an electrical hazard.
This unit must be earthed. This equipment must be disconnected from the mains when
not in use. Do not allow this unit to be exposed to rain or moisture.
To Next Page
Loading...
