A5P | 01
BEFORE FIRST USE
ASSEMBLY
Remove all packaging and labels.
Inspect the product for any damage and check that all parts are included.
Wipe down the appliance using a clean damp cloth.
WARNING! Do not immerse the Stand Mixer in water or any other liquid.
Wash the removable components in warm soapy water and dry thoroughly before assembling.
Push the TILT RELEASE LEAVER down to release
the MIXER HEAD out of its locked position.
Ease the MIXER HEAD back and release the TILT
RELEASE LEAVER. The MIXER HEAD will stay
upright.
Place the STAINLESS STEEL MIXING BOWL onto
the BOWL LOCKING PLATE and align the ridges
with the openings around the edge. Turn clockwise
to lock into place.
Fix your chosen accessory to the ACCESSORY
ATTACHMENT SHAFT. Align the hole with the peg
and simply push upwards then twist anti-clockwise
to secure.
Place the SPLASH GUARD onto the top of the
STAINLESS STEEL MIXING BOWL. Once all
attachments are secure, push the TILT RELEASE
LEAVER to the RIGHT to lower the MIXER HEAD.
To Next Page
Loading...
