How to fix a hash howl on a Vonyx Amplifier?
If your Vonyx Amplifier is producing a hash howl, try the following: 1. Reduce the amplifier's volume. 2. Adjust the tone control to Bass. 3. Increase the distance between the amplifier and microphone, and avoid pointing the microphone towards the amplifier's speaker during use.
Why is my Vonyx Amplifier making noise?
If your Vonyx Amplifier is making noise, it could be due to a few reasons: * The amplifier or transmitter battery might be low. * The microphone cord could be damaged. * There might be interference from another device using the same frequency.
What to do if the power indicator is dim on a Vonyx Amplifier?
If the power indicator on your Vonyx Amplifier is dim, it means the battery is low. Switch to AC power and charge the amplifier immediately.
Essential guidelines for safe operation, avoiding damage, and proper handling of the unit.
Instructions on electrical connections, repairs, and maintenance to prevent hazards.
Guidelines for battery maintenance, replacement, and responsible disposal of electrical products.
Detailed identification and function of each physical component on the PA system.
Detailed explanation of the functions of various buttons on the main unit.
Explanation of functions available via the infrared remote control.
Identification and function of components on the UHF wireless transmitter.
Instructions for powering on, pairing the microphone, and setup procedures.
Troubleshooting common issues like dim power indicator, howl, and noise.
Detailed technical specifications of the PA system, including power, frequency, and dimensions.
List of European Community Directives the product conforms to.
General| Product type | - |
|---|---|
| LED indicators | Power |
| Operating frequency | 863 - 865 MHz |
| 3.5 mm (1/8-inch) in | Yes |
| 6.35 mm (1⁄4-inch) output | 1 |
| Total Harmonic Distortion (THD) | 0.1 % |
| Microphone type | Handheld microphone |
| Microphone power source type | Battery |
| Battery voltage | 12 V |
| Receiver type | Bodypack receiver |
| Receivers AF frequency response | 50 - 16000 Hz |
| Input voltage | 100 - 240 V |
| Input frequency | 50 / 60 Hz |
Weight and Dimensions| Receiver dimensions (WxDxH) | 180 x 320 x 215 mm |
|---|
To Next Page
