Voodoo Lab PX-8 PLUS User Manual

9
1) Apply power while holding down button #2. The LEDs will flash until you release the
button.
2) Press buttons #1 through #4 to select the MIDI channel:
MIDI Channel LED #4 LED #3 LED #2 LED #1
1 OFF OFF OFF OFF
2 OFF OFF OFF ON
3 OFF OFF ON OFF
4 OFF OFF ON ON
5 OFF ON OFF OFF
6 OFF ON OFF ON
7 OFF ON ON OFF
8 OFF ON ON ON
9 ON OFF OFF OFF
10 ON OFF OFF ON
11 ON OFF ON OFF
12 ON OFF ON ON
13 ON ON OFF OFF
14 ON ON OFF ON
15 ON ON ON OFF
16 ON ON ON ON
3) Remove power when finished.
MIDI > Control Change Number
Each MIDI Control Change (CC) message includes a controller number, which specifies
which PX8+ loop to turn on or off. You can select from four different groups of CC
numbers.
The default group is CC numbers 80-87, which means that 80 controls loop #1, 81
controls loop #2, 82 controls loop #3, 83 controls loop #4, 84 controls loop #5, 85
controls loop #6, 86 controls loop #7, and 87 controls loop #8.
Here’s how you select which CC numbers the PX8+ will respond to:
1) Apply power while holding down button #3. The LEDs will flash until you release the
button.

Voodoo Lab PX-8 PLUS Specifications

General

Brand	Voodoo Lab
Model	PX-8 PLUS
Category	Music Pedal
Language	English