Ceramic Master E20 en v1 7
5. PRACTICAL USE
DESCRIPTION OF BUTTONS
PROG - puts the number of the program which is to be
performed into programming mode.
ESC - cancels all changes.
RUN
starts the chosen program when the indicator of
the button flashes in green;
permits the change of the chosen parameter
value in a programming mode.
STOP
stops the program at any moment;
stops the movement of the table at any position;
cancels all changes of the chosen parameter in a
programming mode;
recovers the normal working mode of the
furnace after error.
- closes manually the furnace. The button can
increase/decrease the chosen parameter value
with 100 by pressing it while turning the multi
functional rotary knob.
- opens manually the furnace . The button can
increase/decrease the chosen parameter value
with 10 by pressing it while turning the multi
functional rotary knob.
MFK - multifunctional button; It can choose programs or
parameters and set values.
To Next Page
Loading...