18 English
GETTING CONNECTED
Before product setup, download or update the Amazon Alexa app from your mobile
device's app store and ensure your phone is connected to your 2.4 GHz WIFI network.
1. Plug in your ATOM 2S AE.
2. Open the Alexa app and tap the MORE icon to add a device. Follow the on-screen
instructions. If prompted by the app, scan the 2D barcode located on the product.
If 2D barcode doesn’t work or you are unable to locate your 2D barcode, use the
manual setup in the app.
3. Once successfully connected, a message will appear in the Amazon Alexa app and
the power button on your ATOM 2S AE will be illuminated blue. Your fan is ready
to use.
FACTORY RESET: If for any reason, there is a problem with your product or you wish
to disconnect the product from your network you can reset it to factory settings.
Simply press and hold the POWER and SPEED “+” together for 6 seconds or until
white LED lights begin to ash. To reconnect your ATOM 2S AE, follow steps above.
To Next Page
Loading...
Need help?
General