6 English
- This product employs overload protection (fuse). A blown fuse indicates an overload or short-
circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per
the user servicing instructions (follow product marking for proper fuse rating) and check the
product. If the replacement fuse blows, a short-circuit may be present and the product should be
discarded or returned to an authorized service facility for examination and/or repair.
User Servicing Instructions
1. Using the product controls, turn off the appliance.
2. Grasp the plug (not the cord) and disconnect from the outlet.
3. Risk of Fire. Replace fuse only with 2.5 Amp, 125 Volt fuse as approved by Vornado
Consumer Service. For an authorized replacement fuse, please contact Vornado Consumer
Service.
4. Once the replacement is received, use a small at-head screwdriver to slide open the fuse
cover (located on the plug) (See Fig. A).
5. Remove fuse by using the screwdriver to gently lift each end of the fuse (See Fig. B).
6. Install the replacement fuse by using the screwdriver to gently push each metal end of the
fuse into the receptacle one at a time. Do not push on the center of the fuse—it is fragile
and may break.
7. Slide the fuse cover closed using the screwdriver. When closed, the cover should t
completely in the plug. No part of the cover should stick out (See Fig. C).
8. Plug your appliance into the outlet and turn the power on.
9. If the replacement fuse blows, a short-circuit may be present and the product should be
discarded or returned to an authorized service facility for examination and/or repair.
Risk of re. Do not replace attachment plug. Contains a safety device (fuse, AFCI, LCDI) that should
not be removed. Discard product if the attachment plug is damaged.
SAVE THESE INSTRUCTIONS
Fig. A Fig. B Fig. C
To Next Page
Loading...
Need help?
General
