10 English
1. Choose a 1.5” or thinner solid horizontal surface from
which to secure the product. Do not clip this fan to any
delicate surfaces, as this may leave a permanent mark.
2. Loosen the clip mechanism by rotating the knob on the
very bottom of the clip.
3. Secure the product onto the surface and retighten the
clip knob.
4. Route the cord through the cord clip located on the
back of the product.
NOTE: Be careful not to hang the product in such a way
that it prevents normal fan operation or damages the
cord. Keep the electrical cord safely routed to avoid being
tripped over or pulled. Avoid placing the product where it
could be easily bumped or dropped.
GETTING STARTED
SECURING PIVOT CLIP
To Next Page
Loading...
Need help?
General
