Note that the camera tilt is adjustable. Loosen the two upper-screws and tilt the camera to the desired angle,
before re-tightening them.
Cool Feature Alert: The 150 Mini has a cool way to control the camera settings directly from the Vortex OSD.
Lost Model Alarm
The Lost Model Alarm on the Vortex 150 Mini sounds when the quad is disarmed after landing, or if a receiver
failsafe occurs.
The alarm is designed to be as simple as possible, without controls which could allow it to be accidentally disabled,
resulting in a lost quad.
NOTE: The alarm is driven directly from the OSD on the 150 Mini, and not from the Flight Controller, so
changing beeper settings in the Betaflight configurator will not change its behavior.
To Next Page
Loading...