Vortex 150 MINI User Manual

Specifications
Flight Controller
IMU
Invensense SPI Gyro/Accelerometer, 8kHz loop speeds
CPU
STM32F303 32-bit ARM processor
Firmware
Betaflight compatible (with API version matching that of the OSD)
OSD
CPU
STM32F373 32-bit ARM processor
Resolution
440H x 280V
Style
White, with black surround around all pixels
Output
Programmable Black/White levels
Video Tx Features
Transmitter Module
Custom, integrated into the FC/OSD board
Channels
40 Initially, programmed via OSD
Bands
5, including the ImmersionRC/FatShark bands, and RaceBand
Frequency, IRC/FS
5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880 MHz
Frequency, RaceBand, CH1..8
5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917 MHz
Frequency, ‘A’ Band, CH1..8
5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725 MHz
Frequency, ‘B’ Band, CH1..8
5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866 MHz
Frequency, ‘E’ Band, CH1..8
5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945 MHz
Power Output
1mW -> 600mW +/- 1dB, with regional locked SKUs *
Audio
Stereo, Right channel used for Telemetry, Left channel routed to onboard mic.
Microphone
Onboard (Left Channel)
Recommended Antenna
Supplied SpiroNET v2 Omni, Skew Planar, 4 leaf
Glitch-free Channel Change
Supported
TNR Channel Change
Integrated (requires NFC Wand v1.1 or later)
* Dynamic power control always on, 25mW Max. before takeoff
Power Train
Standard Prop
HQ 3x3 PC
Maximum Prop Size
3”
Stock Motors
OEM 1306-3200kV, single-strand
Recommended Battery
500mAh 4S 45~90C min, 800mAh 4S 45-90C Max.
ESC
45

Vortex 150 MINI Specifications

General

Brand	Vortex
Model	150 MINI
Category	Drones
Language	English