CrossFire
™
HD 1400
8 9
SET AND SAVE MODE SELECTIONS
Ranging Mode Selection
Choose between the HCD and LOS Modes
After activating the Mode/Display Selection, press the
“Measure” button to toggle between the HCD and LOS
displays. Press the “Menu” button to save your desired
choice and move to the Yards/Meters selection screen.
Choose between HCD and LOS
Range Selection
Choose between Yards and Meters
Press the “Measure” button to toggle between the Yards
and Meters display. Press the “Menu” button to save your
desired choice and move to the Brightness selection screen.
Choose between Yards and Meters
To Next Page
Loading...
