The belt of the bike will getting loose when you work out for long time. If you feel the belt is
getting slip or hesitating during workout, please follow the below instructions to adjust the
tension of the belt.
Step 1: Loose M6 Hex Nut (a) 2 or 3 turns by using adjustable wrench (user self-prepared).
Step 2: Tighten M6 Hex Nut (b) and M6 Aircraft Nut (c) 1/4 turn.
Step 3: Repeat step 1 and 2 to tighten the tension bolt on the other side.
Step 4: Ride the bike and feel the tension of the belt, repeat step 1, 2 and 3 until the slipping is
eliminated.
Step5: Tighten M6 Hex Nut (a) on both sides.
Warning: Over tightening the belt may reduce the lifetime of the belt.
To Next Page
Loading...
Need help?
General
