Vortex V-V700 - Assembly Instructions; Step 1: Stabilizers and Leveling

Assembly Instructions
Step 1
4
a. Attach Front stabilizer (9) to Main Body (1) using 4x 20mm Allen bolts (74), 4 x 8mm washers (75).
b. Repeat step a to install Rear stabilizer (8) to Main Body (1).
c. Lever the machine
The user can tighten or loose 2 x Level Feet (21) to level the machine if needed. Tighten 2 x Level foot
lock nuts (57) to make the machine stable before starting workout.
Note: Level Feet (21) and Level foot lock nuts (57) are pre-fitted.