16
BEFORE YOU START
How to insert the mixing knife
To re-insert the mixing knife place the mixing bowl base on an even and
clean surface, place the mixing bowl on top of it and hold its handle firmly.
Now push the mixing knife through the hole in the bottom of the mixing
bowl
1
2
until it’s sealing ring touches the bottom of the mixing bowl.
Then turn the mixing bowl base 30 degrees counter-clockwise to lock the
knife in place
3
.
CAUTION
Risk of damage by leaking out ingredients
Ensure that the sealing ring of the mixing knife is fitted to the knife bearing.
If the sealing ring is damaged the ingredients may leak out and damage
the Thermomix®. Ensure that the mixing knife is locked into the bowl base
correctly.
Before you start
3
1
2
To Next Page
Loading...
