Vorwerk TM5 - CHANGING THE PROTECTION GRID; Changing the protection grid at the back

49
CHANGING THE
PROTECTION GRID
Accessory in selected countries
Changing the protection grid at the back
Disconnect the Thermomix
®
from the mains. Remove the ventilation grille
by lifting it from the clips at the recessed grip
2
. You will now see the back
of the Thermomix
®
with the ventilation slits
3
. Take the protection grid
for the back
4
and insert it. It fits snugly over the ventilation slits
5
. The
ventilation grille can now be reattached. Carefully press it into the clips
until it locks entirely in place. Never operate your Thermomix
®
without the
ventilation grille
6
. Check the protection grids for stains every time you
clean your Thermomix
®
from the outside.
Changing the protection grid
2
3 4
5
6