EN - 16 -
• To accelerate the defrosting process, place one or more bowls of warm water in the
freezer compartment.
• Dry the inside of the unit carefully and set the thermostat knob to the MAX position.
SHIPMENT AND REPOSITIONINGPART - 5.
Transportation and Changing Positioning
• The original packaging and foam may be kept for re-transportation (optional).
• Fasten your appliance with thick packaging, bands or strong cords and follow the
instructions for transportation on the packaging.
• Remove all movable parts (shelves, accessories, vegetable
bins, and so on) or x them into the appliance against
shocks using bands when re-positioning or transporting.
Always carry your appliance in the upright position.
Repositioning the Door
• It is not possible to change the opening direction of your appliance door if door handles
are installed on the front surface of the appliance door.
• It is possible to change the opening direction of the door on models without handles.
• If the door-opening direction of your appliance can be changed, contact the nearest
Authorised Service Centre to change the opening direction.
Replacing the Light Bulb
Important note: Unplug the unit from the
power supply before start the process.
1. Remove the screw on the light cover by screw
driver. (Fig.1)
2. Press the hooks on light cover. (Fig. 2)
3. Open the light cover towards arrow when top
hooks pull out from housing. (Fig. 3)
4. Pull out the cover towards arrow remove it.
(Fig. 4)
5. Turn the light bulb counter clockwise and
remove it. (Fig. 5)
6. Change the present light bulb with a new one of not more than 15 W. (Fig. 5)
7. Implement the steps in reverse order.
8. After waiting 5 minutes, plug the unit.
Replacing LED Lighting
If your appliance has LED lighting contact the help desk as this should be changed by
authorized personnel only.
1
2
3
4
5
To Next Page
Loading...
Need help?
General
