S60
67
ENGLISH
6. Cross fader Reverse
On: Reverse the crossfader
Off: normal mode.
7. Display time
To setup the text display time in the screen. From 0.5 sec. to 12.0 sec. every 0.5 sec. interval.
8. Scroll Speed
To setup the scrool speed of text display. From 50 msec to 2000 msec every 50 msec interval
9. Sensitivity
JOG WHEEL Sensitivity Adjustment (Adjustment range is -20~+20).
The touch sensitivity of the JOG WHEELcan be adjusted to fit the needs and feel of different users. When
adjusting the sensitivity, be conscious of extreme settings which may affect your performance. Setting the
sensitivity too high would engage the touch sensitivity with the hand just above the wheel. Setting the sensitivity
too low may not engage the touch even while pressing firmly on the wheel.
A. Intensity
Adjust the display brightness. You can adjust the brightness range from 1 to 4.
B. A.CUE Level
Adjust the Auto Cue level. You can adjust the level range from -36dB to -78dB.
C. Bit rate
To setup the Bit rate display or not.
D. Version
To display the firmware version.
E. Load Defaults
Press TRACK knob
to enter load defaults.
F. Exit & Save
Exit & Save setting to next power on. (Press the TRACK knob to Exit & Save in any operating mode.)
UTILITY MENU
To Next Page
Loading...