Voxoa S60 - Operating Procedures; Playback and Cueing Operations

68
ENGLISH
OPERATIONS
Starting and Stopping Playback

Starting Playback
Press the PLAY/PAUSE button
13
during the pause or cue mode to start playback.

Stopping Playback
There are two ways to stop playback. Press the PLAY/PAUSE button
13
during playback to pause at that point,
or press the CUE button
14
during playback to return to the position at which playback started.
How to Set a Cue Point
Cueing is the action of preparing tracks for playback. Once a cue point has been stored in memory when the CUE
button is pressed, playback returns to the cue point and enters pause mode. When the PLAY/PAUSE button is
pressed during the cue mode, playback starts. Playback can also be resumed from cue mode by pressing the
PLAY/PAUSE button while holding the CUE button. You also can simply press the CUE PLAY button
15
. This same
action can be performed on the HOT CUES/LOOPS BANK pads
19
.
Step 1 : During playback, press the PLAY/PAUSE button
13
to pause playback at the point you wish to begin playback.
Step 2 : Search for the precise position of the cue point. Using the JOG WHEEL or SEARCH buttons
17
to advance
frames.
Step 3 : Press the CUE button
14
when you reach the desired point. Cue point memory setting is completed when
the IN button
2
is flashing. When a new cue point is stored in memory the previous setting will be erased.

Real-time Cue
During playback, press the IN button
2
at the desired cue point to save the Cue Point. With a little practice, this
is a faster way to set the desired Cue Point.

Auto Cue
The Auto Cue function will automatically set the first cue point at the beginning of each track. To turn Auto Cue on
and off, hold down the SGL/CTN button
32
. When Auto Cue is on, the display will show A. CUE.
HINT: Anytime the CUE button is flashing, it means it is ready to save a new cue point.