49Trail Tech Voyager
Glossary
Glossary
Ride
A “ride” is the collection of information Voyager
is currently logging and displaying (including the
map, altitude, engine temperature, trip distance,
etc.) The ride can be cleared by performing a
“reset ride memory.”
Track
Tracks appear on the map as dark black lines.
They are trails that have been logged on the
current ride. They can be imported/exported to
the MicroSD card.
Route
Routes appear on the map as grey lines. They
are intended to be imported from internet data
or previous rides and followed along. While
following, Voyager logs a new track that appears
black on top of the grey route line.
Trip Distance
Trip distance is a measure of how far you have
travelled. While it is part of the current ride
memory, it can be reset independently. Trip
distance 1 is displayed on the main screen,
while a second trip distance can be selected to
appear on the user screen.
Destination Distance
The distance between your current position and
the currently selected waypoint. You can select
a new destination waypoint in
Ride Menu>Waypoints>Select Destination.
Trail Tech, Inc.
Thank you for using Voyager Moto-GPS. If you
have further questions, do not hesitate to call
Trail Tech at 360-687-4530, or email
tech_support@trailtech.net.
To Next Page
Loading...
General