8
Setting the Anti-Skating – Two Solutions
VPI does not support the need to have anti-skate but does respect the customer’s interest in
having it enabled. Therefore we provide a mechanism for anti-skate and the option of
engaging it.
For normal music listening all the anti-skate you need will be supplied by the lead out wire of
the tonearm to junction box unless you are using test records and measuring sine waves. For
music listening the push back of the wire is ideal for anti-skate.
We supply mechanical anti-skate for those who require it.
If you try adjusting the anti-skate with a groove less
record, you will ruin the twist in the tonearm wire
and void your warranty. Do this with the mechanical
anti-skate if you want that much anti-skate.
Playing Records
Before playing a record, make sure that both of the tonearm VTA thumbscrews are slightly
tight.
Place the black washer on the platter, then the record, then the record clamp. Always turn off
the turntable before installing the record clamp.
To Next Page
Loading...
