VPI Prime - Initial Setup and Safety; Important Precautions; Minimum Specifications

Important: Read Before Proceeding!
 Read and follow the

 Safety Instructions below.
 Save all packing materials. The Prime should only be moved or shipped in its
original packaging to reduce the risk of damage in transit.
 The Prime must be placed on a flat, level surface. This will make setup easy,
provide better sound quality, and put less strain on the main bearing.
Safety Instructions
Follow the instructions below to reduce risk of electrical
hazard or injury.
 To avoid electrical shock, do not open the motor housing.
 If the power cord provided with the Prime does not reach an outlet, use a heavy-
duty, grounded extension cord.
 To avoid electrical shock, always plug the Prime into a grounded outlet.
 Do not expose the Prime to rain or excessive moisture.
 Do not touch the male pivot point of the tonearm
assembly. It is extremely sharp and will puncture
your skin.
Minimum Specifications
 Wow and flutter: >.1%
 Rumble: >85db down
 Speed Accuracy: >.03%
 Total shipping weight  54 pounds.
 Platter run out  +/- .001 inch.