11
into the power outlet, or when the handset is replaced
in its cradle. This is a common event associated with
the closing of any electrical circuit. The user should
not plug the phone into a power outlet, and should not
put a charged handset into the cradle, if the phone is
located in an environment containing concentrations of
adequate ventilation. A spark in such an environment
might include: medical use of oxygen without adequate
ventilation; industrial gases (cleaning solvents;
gasoline vapors; etc.); a leak of natural gas; etc.
16. Only put the handset of your telephone next to your
ear when it is in normal talk mode.
17. Use only the adapters included with this product.
Incorrect adapter polarity or voltage can seriously
damage the product.
Base unit adapter: Input 200-240V AC 50Hz; Output:
6V DC 600mA / 5.1VDC @ 1000mA
Handset charger adapter: Input 100-240V AC 50Hz;
Output: 6V DC 450mA
18. The power adapter is intended to be correctly oriented
designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
19. For pluggable equipment, the socket-outlet shall
be installed near the equipment and shall be easily
accessible.
To Next Page
Loading...
Need help?
General
