VTech 17850

13
SETTING UP
Telephone base installation
Install the telephone base as shown below. Make sure
you clicked the wall mount bracket securely into the
mounting slots before plugging in the adapter and
telephone line cord.
Raise the antenna.
Plug the other end
of the telephone
line cord into the

the back of the
telephone base.
Plug one end of the
telephone line cord
into a telephone

If you have DSL
high-speed Internet

(not included) is
required.
Route the
telephone line cord
through this slot.
Route the power
adapter cord
through this slot.
Plug the small end
of the telephone
base power
adapter into the

on the back of the
telephone base.
Plug the large end
of the telephone
base power
adapter into a
power outlet.