127
protector, plug the phone (or modem/surge protector)
into a different location. If this does not solve the
problem, relocate your phone or modem farther apart
from one another, or use a different surge protector.
• Move your telephone base to a higher location. The
phone may have better reception when installed in a
high area.
• If other phones in your home are having the same
problem, contact your telephone service provider
(charges may apply).
The charge light is off.
• Make sure you plug the power and line cords in
correctly and securely.
• Unplug the electrical power. Wait for 15 seconds,
then plug it back in. Allow up to one minute for the
cordless handset and telephone base to reset.
• Clean the cordless handset, charger and telephone
base charging contacts each month with a pencil
eraser or cloth.
• A blinking CHARGE light is an indication that the
battery is not connected to the handset or is missing
completely. Ensure that the battery is
installed properly.
My Calling Number Display isn’t working.
To Next Page
Loading...
