39
Discoverable mode - before a device can be paired,
it must be set to this mode. When pairing your mobile
phone, the telephone base is set to this mode.
Depending on the mobile phone manufacturer, this
mode is sometimes referred to as Find Me or Visibility.
Paired devices - The devices (mobile phones or
headsets) that have shared registration information
with the telephone base. A total of two devices can be
paired to the telephone base.
Pairing - sometimes referred to as bonding. The
process of sharing registration information between
paired to the telephone base in order to use it with this
telephone system.
PIN - by default, the PIN is 0000 for the telephone
base and for most devices. PIN information may be
exchanged between devices before they can be used.
This is also known as a Passkey or Passcode.
To Next Page
Loading...
