Main
menu
Sub-menu
Volume
Volume
• Adjust the Parent unit’s speaker volume.
Settings
Brightness
• Adjust the parent unit’s LCD screen brightness level.
Screen off timer
• The parent unit display will dim to conserve energy after your chosen amount of time of
inactivity.
Zoom
• Zoom in and out of the video displayed from the baby unit.
Temperature
• Set temperature display in Fahrenheit (
o
F) or Celsius (
o
C).
• Set the minimum/maximum temperature.
• Turn on/off temperature alert tone.
• Set the parent unit to beep whenever the room temperature detected by the baby unit falls outside of
the set temperature range.
Main menu icons
Sound Detection
Sound-activated screen
• When it is on, and the baby unit detects no sound, the parent unit screen stays off to save
power. Once a sound is detected, the parent unit screen and speaker turns on automatically,
and you can see and hear your baby. The parent unit will then turn off again after 50 seconds of
no sound detection.
Note
• When the parent unit screen is off and it receives alerts, for example, link lost between parent
unit and baby unit, or battery is low, the parent unit screen and speaker will turn on for 10
seconds.
VOX (Voice Activated Alert) Sensitivity
• You can choose to hear sounds from the baby unit all the time, or to only hear sounds that
exceed a certain level. Adjust the microphone sensitivity of your baby unit, the higher the
sensitivity level, the more sensitive the baby unit is in detecting sounds to be transmitted to the
parent unit. See Sound sensitivity and sound activation section.
To Next Page
Loading...
Need help?
General
