Warning icons and messages
Battery low at
Parent Unit
The battery is empty and needs to be recharged.
Operation is in progress.
Temperature
too high
The temperature detected by the baby unit is higher than the desired temperature alert range.
Temperature
too low
The temperature detected by the baby unit is lower than the desired temperature alert range.
No Link to
Camera
The parent unit is searching for baby units or the link between the baby unit and the parent unit is
lost.
The parent unit is connected to AC power.
LINK • On when the parent unit is linked to the baby unit.
• Flashes when the link to the baby unit being viewed is lost.
• On when the parent unit is connected to AC power, or the battery is charging.
• Flashes when the parent unit battery is low and needs charging.
• Off when the parent unit is disconnected from AC power.
Parent Unit Indication Lights
To Next Page
Loading...
