To Next Page

To Previous Page

Main

Sub-

Alert settings

• Set the parent unit to beep when the battery is low.

• Set the parent unit to beep when the link between the parent unit and the

baby unit is lost.

• Set the conrmation tone on or o󰀨 when selecting an option in the

menus.

• Set the parent unit to beep when the baby unit detects sounds while in

Split mode (For BM4200N-2 only).

Temperature

• Turn on/o󰀨 temperature alert tone.

• Set the parent unit to beeps whenever the room temperature detected by the

baby unit falls outside of the set temperature range.

• Set the minimum temperature.

• Set the maximum temperature.

• Set temperature display in Fahrenheit (

F) or Celsius (

Sound activation - screen and audio

Turn on/o󰀨 sound activation

• Set sound activation on or o󰀨.

• When it is on, and the baby unit detects no sound, the parent unit screen

stays o󰀨 to save power. Once a sound is detected, the parent unit screen and

speaker turns on automatically, and you can see and hear your baby. The

parent unit will then turn o󰀨 again after 50 seconds of no sound detection.

Note

• When the parent unit screen is o󰀨 and it receives alerts, for example, link lost

between parent unit and baby unit, or battery is low, the parent unit screen

and speaker will turn on for 10 seconds.

VOX (Voice Activated Alert) Sensitivity

• You can set VOX sensitivity level to activate parent unit screen and sound

when baby unit detects sounds that exceed certain levels. See Sound

sensitivity and sound activation section.

VTech BM4200N User Manual

Questions and Answers: