Dim Mode
The parent unit display will dim to conserve energy after 10 minutes of inactivity, in
which there is neither key pressed nor alert received from the baby unit.
10 min inactivity
Press any buttons
Night Vision
The baby unit has infrared LEDs that allow you to see your baby clearly at night or in
a dark room. When the baby unit being viewed detects low light levels, the infrared
LEDs are switched on automatically. The images from the baby unit are in black and
white, and
appears on the screen.
Notes:
• It is normal if you see a short
white glare on your parent unit
screen as the baby unit is adapting
to the dark environment.
• When the infrared LEDs are on,
the images are in black and white.
This is normal.
Tip:Depending on the surroundings
and other interfering factors, like
lightings, objects, colors and
backgrounds, the video quality may
vary. Adjust the baby unit’s angle or
place the baby unit at a higher level
to prevent glare and blurry display.
To Next Page
Loading...
Need help?
General
