8
Handset battery
It takes up to 11 hours for the battery to be fully charged.
When it is fully charged, you can expect the following
performance:
Operation Operating time
While in handset use (talking*) Up to seven hours
While in speakerphone mode (talking*) Up to ve hours
While not in use (standby**) Up to seven days
* Operating times vary depending on your actual use and the age
of the battery.
** Handset is not charging or in use.
The battery needs charging when:
A new battery is installed in the handset.
The handset beeps.
A battery is properly installed and the screen is blank.
Low battery or Place in charger displays on the cordless
handset screen.
CAUTION:
To reduce the risk of re or injury, read and follow these
instructions:
Use only the batteries provided or equivalent. To order
a replacement, go to www.vtechcanada.com or call
1 (800) 267-7377.
Do not dispose of the batteries in a re. Check with local
waste management codes for special disposal instructions.
Do not open or mutilate the batteries. Released electrolyte is
corrosive and may cause burns or injury to the eyes or skin.
The electrolyte may be toxic if swallowed.
Exercise care in handling batteries in order not to create a
short circuit with conductive materials.
Charge the batteries provided with or identied for use with
this product only in accordance with the instructions and
limitations specied in this manual.
Observe proper polarity orientation between the battery and
metallic contacts.
To prevent re or shock hazard, do not expose this product to
water or any type of moisture.
•
•
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
Frequency and Channels
Power
Memory
