VTech CM18045 User Manual

23
Telephone settings
Telephone setup
Auto key lock
Use this feature to prevent accidental dialing while carrying the
handset around. When auto key lock is on, the handset will lock
the keypad automatically after 30 seconds in idle mode.
1. When the handset is idle, press MENU/SELECT.
2. Press DIR or CID to scroll to Handset setup, then press
MENU/SELECT or Select.
3. Press DIR or CID to scroll to Auto key lock, then press
MENU/SELECT or Select.
4. Press DIR or CID to scroll to On or Off.
5. Press MENU/SELECT or Select to save the setting and return to
the previous menu. You hear a confirmation tone. To exit without
making changes, press OFF/CANCEL or Back.
NOTES:
• To manually lock and unlock the keypad, see page 28.
• When the handset keypad is locked and there is an incoming call on a line, you
cannot answer the call if the handset does not belong to the line’s ring group.
Refer to Handset information on page 26 to see which ring group(s) it belongs to.
LCD Language
This feature allows you to change the language used for handset
displays. By default, the language is set to English.
1. When the handset is idle, press MENU/SELECT.
2. Press DIR or CID to scroll to Handset setup, then press
MENU/SELECT or Select.
3. Press DIR or CID to scroll to Language, then press
MENU/SELECT or Select.
4. Press DIR or CID to scroll to English, Français or Español.
5. Press MENU/SELECT or Select to save the setting and return to
the previous menu. You hear a confirmation tone. To exit without
making changes, press OFF/CANCEL or Back.

VTech CM18045 Specifications

General

Brand	VTech
Model	CM18045
Category	Telephone
Language	English