VTech CM18045 User Manual

26
Telephone settings
Telephone setup
Factory reset
Use this feature to reset all settings of this handset to their default
settings. All phone settings, directory, caller ID history, redial list,
speed dial memory, private mailbox messages will be reset.
Make sure the telephone system is idle before you reset the handset.
1. When the handset is idle, press MENU/SELECT.
2. Press DIR or CID to scroll to Factory reset, then press
MENU/SELECT or Select.
3. The handset displays Are you sure to reset handset?. Press
Yes to confirm and then return to the previous menu. To exit
without making changes, press OFF/CANCEL or No.
Handset information
This feature displays the ring group status of the handset, and the
extension number of an accessory paired to the handset.
Ring group defines if the handset will ring when there is an
incoming call at the corresponding line. To change the setting and
for more details, refer to the Ring group section in the user’s
manual of CM18445 console.
1. When the handset is idle, press MENU/SELECT.
2. Press DIR or CID to scroll to Handset info, then press
MENU/SELECT or Select.
3. Press OFF/CANCEL or OK to return to the previous menu.
User support
Use this feature to display the VTech website.
1. When the handset is idle, press MENU/SELECT.
2. Press DIR or CID to scroll to User support, then press
MENU/SELECT or Select.
3. Press OFF/CANCEL or OK to return to the previous menu.

VTech CM18045 Specifications

General

Brand	VTech
Model	CM18045
Category	Telephone
Language	English