14
Connect the charger
NOTES
• Use only the adapters provided.
• Make sure the electrical outlets are
not controlled by wall switches.
• Connect the power adaptor in a
vertical or floor mount position only.
The adapter’s prong is not designed
to hold the weight of unit, so do not
connect it to any ceiling, under-the-
table, or cabinet outlets. Otherwise,
the adaptor may not properly connect
to the mains.
Charge the battery
Place the handset in the telephone base
or charger to charge.
CS2000 series
CS2050 series
Once you have installed the battery, the
handset LCD display indicates the battery
status (see the table below).
Battery
indicators
Battery
status
Action
flashes
Battery has no
charge or very
little
charge. The
handset cannot
be used.
Charge without
interruption
(at least 30
minutes).
steadily on
Battery has
enough charge
to be used for a
short time.
Charge without
interruption
(at least 30
minutes).
flashes
Battery
charging in
progress.
If full battery
charging is
reached, the
icon will stop
animation in
cycle even the
handset is on
charging cradle.
steadily
on
Battery is
charged.
To keep the
battery charged,
place it in the
telephone base
or charger when
not in use.
To Next Page
Loading...
Need help?
General
