VTech CS2052 Series User Manual

33
Ringer
1. Press when the phone is not in
use.
2. Press ▼/▲ to choose HS SETTINGS,
and then press to select.
3. Press ▼/▲ to choose RING SETUP,
and then press to select. There
are 3 options:
• INT, RING - Internal call ringtone
• EXT, RING - External call ringtone
• RING VOLUME - Ringer volume
Set ringer melody
You can choose from different ringer
melody for each handset and the
telephone base.
1. Follow Ringer and reach RING SETUP
option.
2. Press ▼/▲ to choose setting internal
call ringtone or external call ringtone.
3. Press .
• MELODY 1 displays.
•
X
displays next to the selection.
4. Press ▼/▲ to select your preferred
ringtone from MELODY 1 to MELODY
10.
5. Press to save.
• You hear a confirmation tone.
NOTE
• If you turn off the ringer volume, you
will not hear ringer tone samples.
Set ringer volume
You can set the ringer volume or turn
the ringer off on each handset.
When the ringer is off, appears on
the screen.
1. Follow Ringer and reach RING SETUP
option.
2. Press ▼/▲ to choose RING VOLUME,
and then press to select.
3. Press ▼/▲ to select from VOLUME
OFF to VOLUME 5, and then press
to select and save.
•
X
displays next to the selection.
• You hear a confirmation tone.
NOTE
• If the ringer volume is set to off, that
handset is silenced for all incoming
calls except paging tone.

VTech CS2052 Series Specifications

General

Brand	VTech
Model	CS2052 Series
Category	Telephone
Language	English