VTech CS2052 Series User Manual

36
Base settings
Delete handset
1. Press when the phone is not in
use.
2. Press ▼/▲ to choose BS SETTINGS,
and then press to select.
3. Press ▼/▲ to choose DELETE HS, and
then press to select.
• PIN? - - - - displays; - - - - cursor
flashes.
• Default 4-digit PIN is 0000.
• Press to delete.
• The PIN will be masked as
XXXX
.
4. Press to confirm.
• Return to BS SETTINGS menu.
• The deleted handset will be
removed from the registered
handsets list, and the antenna icon
will disappear. REGISTER displays.
NOTE
• If the PIN is incorrect, the screen
returns to the previous menu.
Set dial mode
The dial mode is preset to touch-tone
dialing. If you have pulse (rotary) service,
you need to change the dial mode to
pulse dialing before using the telephone
to make a call.
1. Press when the phone is not in
use.
2. Press ▼/▲ to choose BS SETTINGS,
and then press to select.
3. Press ▼/▲ to choose DIAL MODE,
and then press to select.
4. Press ▼/▲ to choose TONE or PULSE,
and then press to select.
•
X
displays next to the selection.
• The screen returns to the previous
menu.
• You hear a confirmation tone.
Change length of flash time
1. Press when the phone is not in
use.
2. Press ▼/▲ to choose BS SETTINGS,
and then press to select.
3. Press ▼/▲ to choose FLASH TIME,
and then press to select. There
are 3 options:
• SHORT
• MEDIUM
X
(by default)
• LONG
4. After you have selected, press
to confirm and save.
• You hear a confirmation tone.

VTech CS2052 Series Specifications

General

Brand	VTech
Model	CS2052 Series
Category	Telephone
Language	English