VTech CS2052 Series User Manual

44
Frequently asked
questions
Below are the questions most frequently
asked about the cordless telephone.
If you cannot find the answer to your
question, visit our website at
https://euphones.vtech.com.
My telephone
does not work
at all.
Make sure the telephone base is installed
properly, and battery is installed and
charged correctly. For optimum daily
performance, return the handset to the
telephone base after use.
The display
shows No line. I
cannot hear the
dial tone.
Disconnect the telephone line cord from
your telephone and connect it to another
telephone. If there is no dial tone on
that other telephone either, then the
telephone line cord may be defective. Try
installing a new telephone line cord.
If changing the telephone line cord does
not help, the wall jack (or the wiring to this
wall jack) may be defective. Contact your
telephone service provider.
You may be using a new cable or VoIP
service, the existing telephone jacks in
your home may no longer work. Contact
your service provider for solutions.
I cannot dial out.
Make sure there is a dial tone before
dialing. It is normal if the handset takes
a second or two to synchronize with the
telephone base before producing a dial
tone. Wait an extra second before dialing.
Eliminate any background noise. Mute
the handset before dialing, or dial from
another room in your home with less
background noise.

VTech CS2052 Series Specifications

General

Brand	VTech
Model	CS2052 Series
Category	Telephone
Language	English