28
Appendix
Common cure for electronic equipment
If the unit is not responding normally, try putting the handset in the telephone base. If
it does not respond, try the following (in the order listed):
Disconnect the power to the telephone base.
Disconnect the battery on the handset.
Wait a few minutes before connecting the power to the telephone base.
Re-install the battery and place the handset in the telephone base.
Wait for the handset to synchronize with the telephone base. Allow up to one minute
for this to take place.
•
•
•
•
•
•
Troubleshooting
To Next Page
Need help?
General
