25
Play the announcement
1. Press MENU when the phone is not
in use.
2. Press q or p to choose Answering
sys then press SELECT.
3. Press SELECT to select
Announcement.
4. The handset displays Play [2] Del [3]
Rec [7] and it announces, “To play,
press 2. To record, press 7.” Press 2
to play the current announcement.
Options during playback:
• Press p/VOLUME/q to adjust the
listening volume.
• Press 5 or OFF to stop at any time.
• Press to switch between the
speakerphone and the handset
earpiece.
Delete the announcement
1. Press MENU when the phone is not
in use.
2. Press q or p to choose Answering
sys then press SELECT.
3. Press SELECT to select
Announcement.
4. The handset displays Play [2]
Del [3] Rec [7] and it announces,
“To play, press 2. To record, press
7.” Press 3 to delete your own
recorded announcement. The
handset displays Annc deleted
and it announces, “Announcement
deleted.” You hear a confirmation
tone.
• After you deleted your own recorded
announcement, the answering
system answers calls with the default
announcement.
Set number of rings
You can set the answering system to
answer an incoming call after two, three,
four, five or six rings; or toll saver.
If you choose toll saver, the answering
system answers a call after two rings
when you have new messages, or
after four rings when you have no new
messages. This enables you to check
for new messages and avoid paying
unnecessary long distance charges if
you are calling from outside your local
area.
1. Press MENU when the phone is not
in use.
2. Press q or p to choose Answering
sys and then press SELECT.
3. Press q or p to choose Ans sys
setup and then press SELECT.
4. Press q or p to choose # of rings
and then press SELECT.
5. Press q or p to choose 6, 5, 4,
3, 2 or Toll saver and then press
SELECT to save. You hear a
confirmation tone.
Turn the call screening on or off
You can hear incoming messages at
the telephone base while they are being
recorded.
1. Press MENU when the phone is not
in use.
2. Press q or p to choose Answering
sys and then press SELECT.
3. Press q or p to choose Ans sys
setup and then press SELECT.
4. Press SELECT to select Call
screening.
5. Press q or p to choose On or Off,
and then press SELECT to save.
You hear a confirmation tone.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
